Electrospinning/Electrospray
electrospray관련 연구....
작성자
nanonc
작성일
2015-10-05 23:59
조회
6040
출처:http://www.materials.qmul.ac.uk/staff/staff.php?uid=8&page=publications
In press |
High Resolution Print Patterning of a Nano-suspension D.Z. Wang, S.N. Jayasinghe and M.J. Edirisinghe, J. Nanoparticle Research, in press. |
Jet-Break-up in Nano-suspensions during Electrohydrodynamic Atomization in the Stable Cone-jet Mode S.N. Jayasinghe and M.J. Edirisinghe, J. Nanoscience & Nanotechnology, in press. |
Electrohydrodynamic Atomization of Protein (Bovine Serum Albumin) R. Pareta, A. Brindley, M.J. Edirisinghe, S.N. Jayasinghe and Z. Luklinska, J.Mater.Sci. : Mater. in Medicine, in press |
2005 |
Preparation of Lead Zirconate Titanate Nanopowders by Electrohydrodynamic atomisation. N.Jayasinghe, R.A.Dorey, M.J.Edirisinghe, R.W.Whatmore and Z.B. Luklinska , Appl. Phys. A 80 (Materials Science & Processing), 723-725 (2005) |
Electrostatic Atomization of a Ceramic Suspension at Pico-Flow Rates S.N. Jayasinghe and M.J. Edirisinghe, Appl. Phys. A., 80(2005)399-404. |
Novel Hydroxyapatite Coating on Alumina by Electrospraying J. Huang, S.M. Best, S.N. Jayasinghe, M.J. Edirisinghe and W. Bonfield, Key Engineering Materials, 284-286(2005)191-194. |
Novel Forming of Single and Multiple Ceramic Micro-channels S.N. Jayasinghe and M.J. Edirisinghe, Appl. Phys. A., 80(2005)701-702 [Rapid Communication] |
Preparation of Lead Zirconate Titanate Nano-powder by Electrohydrodynamic Atomization S.N. Jayasinghe, R. Dorey, M.J. Edirisinghe and Z. Luklinska, Appl. Phys. A., 80(2005)723-725 [Rapid Communication] |
Electrohydrodynamic Atomization of Protein (Bovine Serum Albumin) Pareta, A. Brindley, M.J. Edirisinghe, S.N. Jayasinghe and Z.B. Luklinska , J.Mater.Sci. : Mater. in Medicine, in press |
2004 |
In-Vitro Assessment of the Biological Response to Nano-sized Hydroxyapatite. J. Huang, S.M. Best, W. Bonfield, R.A. Brooks, N. Rushton, S.N. Jayasinghe and M.J. Edirisinghe, J. Mater. Sci. :Mater. in Medicine , 15(2004)441-445. |
Electrospraying of a Nano-hydroxyapatite Suspension J. Huang, S.N. Jayasinghe, S. M. Best, M.J. Edirisinghe, R. A. Brooks and W. Bonfield, J.Mater.Sci., 39(2004)1029-1032. |
Structural Evaluation of Polysilane derived Products: From Amorphous to Thermodynamically Stable Phases X. Li and M.J. Edirisinghe, Phil. Mag. A., 84(2004)647-671. |
Electrically Forced Jets and Microthreads of High Viscosity Dielectric Liquids S.N. Jayasinghe and M.J. Edirisinghe, J. Aerosol Sci., 35(2004)233-243. |
Electrostatic Atomization of a Ceramic Suspension S.N. Jayasinghe and M.J. Edirisinghe, J. Euro. Ceram. Soc., 24(2004)2203-2213. |
Relic and Droplet Sizes produced by Electrostatic Atomization of Ceramic Suspensions S.N. Jayasinghe, M.J. Edirisinghe and P.G. Kippax, Appl. Phys. A., 78(2004)343-347. |
Electrohydrodynamic Atomization of a Concentrated Nano-Suspension M.J. Edirisinghe and S.N. Jayasinghe, Int. J. of Appl. Ceram. Tech., 1(2004)140-145.[Invited for Special Issue on Nanotechnology]. |
Evolution of the Ceramic Structure During Thermal Degradation of a Si-Al-C-O Precursor X. Li and M.J. Edirisinghe, Chemistry of Materials, 16(2004)1111-1119. |
Electric-field Driven Jetting from Dielectric Liquids S.N. Jayasinghe and M.J. Edirisinghe, Appl. Phys. Lett., 85(2004)4243-4245. |
Controlled Deposition of Nano-particle Clusters by Electrohydrodynamic Atomization S.N. Jayasinghe, M.J. Edirisinghe and D.Z. Wang, Nanotechnology, 15(2004)1519-1523. |
2003 |
A Novel Method of Freeforming Multiple Tracks from Concentrated Suspensions S.N. Jayasinghe and M.J. Edirisinghe, J.Mater. Res. Innovat., 7(2003)62-64. |
Formulation of a Ceramic Ink for a Wide Array Drop-on-demand Ink-jet Printer X. Zhao, J.R.G. Evans, M.J. Edirisinghe and J.H. Song, Ceramics International, 29(2003)887-892. |
Electrostatic Atomization of Chitosan S.N. Jayasinghe and M.J. Edirisinghe, J. Mater. Sci. Lett., 22(2003)1443-1445. |
Development of Novel Materials Forming Processes using Electrostatic Atomization S.N. Jayasinghe and M.J. Edirisinghe, J. Aerosol Sci. , (EAC 2003)S65-S66. |
Solid Freeform Fabrication of Ceramics B.Y. Tay, J.R.G. Evans and M.J. Edirisinghe, International Materials Reviews, 48(2003)341-370. |
Preparation of Collagen Films by Electrostatic Atomization S.N. Jayasinghe and M.J. Edirisinghe, Mater. Sci. Lett., 22(2003)1617 – 1619 |
A New Al Co-ordination Site in Si-C-Al-N-(O) Ceramics X. Li and M.J. Edirisinghe, J. Amer. Ceram. Soc., 86(2003)2212-2214. |
Structural Investigations of Si-Al-C-O Precursor and their Pyrolysis Products in Nitrogen X. Li and M.J. Edirisinghe, Proc. Roy. Soc. A., 459(2003)2731-2747. |
2002 |
Ink-jet Printing of Gold Conducting Tracks H.M.Nur, J.H. Song, J.R.G. Evans and M.J. Edirisinghe, J.Mater. Sci: Mater. in Electronics, 13(2002)213-219. |
Ink-jet Printing of Ceramic Pillar Arrays X. Zhao, J.R.G. Evans, M.J. Edirisinghe and J.H. Song, J. Mat. Sci., 37(2002)1987-1992. |
Direct Ink-jet Printing of Vertical Walls X. Zhao, J.R.G. Evans, M.J. Edirisinghe and J.H. Song, J.Amer Ceram. Soc., 85(2002) 2113-2115. |
A Novel Method of Forming Open Cell Ceramic Foam S.N.Jayasinghe and M.J. Edirisinghe, J. Porous Materials, 9(2002)265-273. |
Ceramic Forming by Electrostatic Atomization S.N. Jayasinghe and M.J. Edirisinghe, Proc. of the ILASS(2002) , Zaragoza, Spain pp. 389-394. |
Effect of Viscosity on the Size of Relics Produced by Electrostatic Atomization S.N. Jayasinghe and M.J. Edirisinghe, J.Aerosol.Sci., 33(2002)1379-1388. |
Time Dependent Geometrical Changes in a Ceramic Ink Droplet B.Y. Tay and M.J. Edirisinghe, Proc. Roy. Soc. A., 458(2002)2039-2051. |
A Novel Ceramic Printing Technique based on Electrostatic Atomization of a Suspension S.N. Jayasinghe, M.J. Edirisinghe and T. de Wilde, J.Mater. Res. Innovat., 6(2002)92-95. |
Porosity and Strength of Silicon Carbide Foams Prepared using Preceramic Polymers M.R. Nangrego and M.J. Edirisinghe, J.Porous Mater., 9(2002)131-140. |
Production of Tungsten Oxide Coatings via Sol-gel Processing of Tungsten Anion Solutions A.P. Baker, S.N.B. Hodgson and M.J. Edirisinghe, Surface and Coatings Tech., 153(2002)184-193. |
Method for Creating Field Electron Emission Materials and Devices R.A.Tuck, A.P.Burden, C.Hood, W.Lee, M.S.Waite and M.J. Edirisinghe, GB Patent 2367186. ( Also published as WO0203413, US2004025732 ) |
Obtaining Fine Droplet Relics by Electrostatic Atomization of Viscous Liquids S.N. Jayasinghe and M.J. Edirisinghe, J. Mater. Sci. Lett., 37(2002)1987-1992. |
On Substrate Selection for Direct Ink-Jet Printing B.Y. Tay and M.J. Edirisinghe, J. Mater. Sci. Lett., 21(2002)279-281. |
Deposition of Fine Silicon Carbide Relics by Electrostatic Atomisation of a Polymeric Precursor D.A. Grigoriev, M.J. Edirisinghe and X. Bao, J. Mater. Res., 17(2002)487-491. |
Evaporation of Liquid during Cone-Jet Mode Electrospraying D.A. Grigoriev and M.J. Edirisinghe, J. Appl. Phys., 91(2002)437-439. |
Dispersion and Stability of Silver Inks B.Y.Tay and M.J. Edirisinghe, J.Mater.Sci., 37(2002)4653-4661. |
2001 |
Preparation of Silicon Carbide by Electrospraying of a Polymer Precursor D.A.Grigoriev, M.J. Edirisinghe, X.Bao, J.R.G. Evans and Z.B.Luklinska, Phil. Mag Lett., 81(2001)285-291. |
Combinatorial Searches of Inorganic Materials Using the Ink-Jet Printer: Science, Philosophy and Technology J.R.G. Evans, M.J. Edirisinghe, P.V.Coveney and J.Eames, J. Euro. Ceram. Soc., 21(2001)2291-2299. |
PZT Pillars for 1-3 Composites Prepared by Ink-jet Printing A.R.Bhatti, M.Mott, J.R.G. Evans and M.J. Edirisinghe, J. Mater. Sci. Lett., 20(2001)1245-1248. |
Ceramic Freeforming using an Advanced Multi-nozzle Ink-jet Printer X. Zhao, J.R.G. Evans, M.J. Edirisinghe and J.H. Song, J.Mater. Synth. Proc., 9(2001)319-327. |
Controlled Synthesis of Silicon Carbide-Aluminum Nitride Composites using a Preceramic Polymer Route X. Li and M.J. Edirisinghe, J. Mater. Sci. Lett., 21(2001)21-23. |
Ceramic Injection Moulding M.J. Edirisinghe, Encyclopedia of Materials: Science and Technology, K.H.J. Buschow, R.W. Cahn, M.C. Flemings et al. (editors), Elsevier, 5(2001)4088-4094. [invited] |
Preparation of Ceramic Foams from Polymeric Precursors X. Bao, M.R. Nangrego and M.J. Edirisinghe, Brit. Ceram. Proc., 62(2001)1-16. |
Preparation of Zirconia Inks for Continuous Jet Printing M.R. Nangrejo, X. Bao and M.J. Edirisinghe, J. Mater. Res., 16(2001)373-384. |
Investigation of Some Phenomena Occurring During Ink-jet Printing of Ceramics B.Y. Tay and M.J. Edirisinghe, J. Mater. Res., 16(2001)373-384. |
Processing of Ceramic foams from Polymeric Precursor-Alumina Suspensions M.R. Nangrejo, X. Bao and M.J. Edirisinghe, Cellular Polymers, 20(2001)17-35. [invited paper] |
Silicon Carbide-Titanium Carbide Composite Foams Produced using a Polymeric Precursor M.R. Nangrejo, X. Bao and M.J. Edirisinghe, Int. J. Inorg. Mater., 3(2001)37-45. |
전체 0개